Click image to view full size image
1.PRODUCT INTRODUCTION
Name: Ferro silicon Powder |
Spec: * |
||
Chemical Composition: |
Size: 60-300mesh or customized |
||
Si |
45-74% |
C |
0.083% |
P |
0.03% |
Al |
1.2% |
S |
0.014% |
* |
* |
2.Silicon particle processing method
A recovery device for recovering silicon particles from a discharged liquid containing silicon particles, a mixed liquid tank for storing the dissolved mixed liquid, and a cloth filter for filtering the dissolved mixed liquid introduced into the mixed liquid tank are provided. The above-mentioned discharged liquid is discharged when a single crystal silicon ingot is processed by a silicon ingot processing device to form a silicon block, and the above-mentioned dissolving mixed liquid is formed by mixing acid with the slurry-like silicon particles recovered by the above-mentioned recycling device to dissolve impurities.
First, the dissolved mixed liquid in the mixed liquid tank is supplied to the filter cloth filter to start filtering, and the filtrate at this time is returned to the mixed liquid tank to circulate.
If a filter cake of the desired thickness is formed on the filter cloth of the cloth filter, the filtrate does not return to the mixed liquid tank but flows through the discharge passage for filtering.
After the filtration of the above-mentioned dissolved mixed liquid is completed, pressurized air is supplied to the filter surface side of the filter cloth filter to dehydrate the filter cake formed on the filter cloth, and then pure water is supplied to the mixed liquid tank to pass The pure water in the mixed liquid tank was supplied to the filter cloth filter to wash the filter cake on the filter cloth.
Next, pressurized air is supplied to the filter surface side of the filter cloth filter, thereby dewatering the filter cake on the filter cloth.
Next, pressurized air is supplied to the opposite side of the filter surface of the filter cloth filter to cause the filter cake on the filter cloth to fall off, thereby obtaining single-crystal silicon particles.
3. Product production
4.Quality control
4. Support sea, land and air transportation
6. Support express delivery
http://www.glory-metallurgy.com/
E-mail: 